 Flux is required for soldering to lead or copper foil. Studio Pro Safety Flux Nokorode Paste Flux, 1.7 oz Fluxomatic Gel Flux Johnson's Liquid Soldering Flux, 3.5 oz. Flux Brush Flux Dispenser No-Spill Bottle Holder (Flux/Patina/Oil)
| EnviroGOLD Glass Cutting Fluid (4 oz.) Inland RinsesOff Cutting Oil (4 oz.) Inland Diamond Grinder Coolant (8 oz.)
|
CRL S50 Sprayway Glass Cleaner CJ's Flux & Patina Remover, 8 oz CJ's Flux & Patina Remover, 16 oz Clarity Stained Glass Finishing Compound Pumice
|  Whiting is used by the craftsman as a cleaning agent to help remove the residues from the work after the soldering operation. Whiting is one of the ingredients in polishing compounds, putties, paints, etc. This soft non-abrasive powder is usually applied with a stiff scrub brush. Its use is recommended particularly on copper foil shades to remove the flux and gum, and to give a high shine to the glass and metal. Whiting (2 lb. bag) Whiting (50 lb. bag)
|
 Use when cementing a leaded glass window or panel. Some people use whiting, but we like the traditional sawdust. |  Chain, tinned copper wire, suction cups, chain, and other things to help you hang your stained glass creations. Gallery Hanger Chain for Hanging Things Tinned Copper Wire Suction Hangers 1/2" Wide Magnet with Adhesive Backing Black Nylon Thread, 33 yd roll
|
 To keep your soldering iron clean and trouble-free. | Mark Stay II, 1 oz. jar Weldbond Adhesive Double Faced Tape E-Z Tacky Wax, 6 oz. jar CRL S209 Mirror Edge Sealant
|
Novacan Super Brite Copper Patina for Solder, 8 oz. Novacan Black Patina, 8 oz. Novacan Black Patina, 16 oz. Novacan Black Patina for Zinc, 8 oz. Brass Black, 3 oz.
| Orange Carbon Paper Blue Carbon Paper 26" x 39" Carbon Paper Pattern Paper 24" Wide Pattern Paper 36" Wide
|
Black Glazing Compound Inland Black Cement System (4 lbs.) Cementing a Stained Glass Window Lamp Black, 1 lb box
| Dura-Ink #15 Felt Tipped Glass Marker DecoColor White Opaque Marking Pen
|
Metal Push Pins, 5/8", Box of 100 Morton Metal Push Pins, 1/2" (LB16)
|