|
|
Professional Weighted Lead Knife
|
Item no:
6838
|
|
Retail price:
$18.52
|
|
In stock:
4
|
|
|
Click to view or buy this item
|
|
This lead knife features a comfortable handle, a long-lasting stainless steel blade that retains its edge, and a weighted metal butt end for tapping stop blocks or nails into place as you cut and assemble your lead panel. It is designed for safety, in that your hand cannot slip onto the blade. The curved blade allows you to cut using a gentle rocking motion, which helps you avoid crimping the lead came. All in all, a solid and capable tool for lead work.
|
|
|
Cascade Lead Knife
|
Item no:
6839
|
|
Retail price:
$19.25
|
3 or more $17.33 (10% discount) 6 or more $15.40 (20% discount)
|
In stock:
1
|
|
Special order item, limited supply on hand, 7-10 day delay if you want more.
|
Click to view or buy this item
|
|
The blade is made of sharpened stainless steel. It can be re-sharpened if necessary. Did we mention that it is sharp? Holy smokes, please be careful. Has a dull end, too, made of lead. It's there for tapping things, as you lead craftpeople are wont to do. Size: 6"-1/2" Blade Size: 2-3/4" x 1-3/4"
|
|
|
Lead & Glass Stop Blocks
|
Item no:
6833
|
Aanraku Glass Studios
item:
LSB
|
Retail price:
$5.46
|
|
In stock:
16
|
|
|
Click to view or buy this item
|
|
Aanraku® Lead & Glass Stop Blocks for lead came stained glass work (25 pieces per bag).For use with horseshoe nails or round retaining nails.
|
|
|
Triple-Headed Glazier's Hammer
|
Item no:
6919
|
|
Retail price:
$16.64
|
|
In stock:
3
|
|
|
Click to view or buy this item
|
|
This Leponitt hammer is heftier than the double-faced mallet we also offer. Originally designed for the glazing industry, it is versatile enough to use in other crafts. It has three interchangeable heads, the spare head being stored at the bottom end of the handle. One head is rubber for use on glass (gently, now...); one is hard plastic for tapping lead or pushpins; and one is steel for use on lead or nails. Each head simply screws in place into the one-piece glass fiber reinforced head and handle. About 11 inches long, with 1 in diameter heads, it weighs 9.5 oz.
|
|
|
Two-Headed Plastic/Rubber Jeweler's Mallet
|
Item no:
6920
|
|
Retail price:
$8.57
/each
|
3 or more $7.71 (10% discount) 6 or more $6.86 (20% discount)
|
In stock:
16
(units: each)
|
|
|
Click to view or buy this item
|
|
The perfect little double-faced mallet for stained glass work. Use one side for tapping those horseshoe nails and metal push pins into place, and the other side for gently tapping glass into lead came. No doubt you will find other uses, such as imparting a friendly "Hello" to your fellow subway rider having that most INTERESTING cell phone chat about his troubling medical afflications.
|
|
|
Pattern Shears for Lead
|
Item no:
6792
|
Diamond Tech
item:
605
|
Retail price:
$10.68
/each
|
6 or more $9.61 (10% discount) 12 or more $8.54 (20% discount)
|
In stock:
29
(units: each)
|
|
|
Click to view or buy this item
|
|
Cutting your pattern apart with lead shears removes a strip of paper 1/16" wide from the pattern to allow for the lead. Projects fit together properly without "growing". Precision ground stainless steel blades.
|
|
|
Schablonenscheren (Double Bladed Pattern Shears)
|
Item no:
6845
|
|
Retail price:
$4.75
|
|
In stock:
Plenty
|
|
Special order item, limited supply on hand, 7-10 day delay if you want more.
|
Click to view or buy this item
|
|
Be a Schablonenscherenmeister! This tool removes 1.75mm of paper between the blades to allow for the lead came. Used by studios since early times, they are almost indispensable for any intricate pattern work. 8" long. Imported.
|
|
|
Nervo Stained Glass Pattern Shears for Lead #4200
|
Item no:
6845N
|
|
Retail price:
$2.95
|
|
In stock:
25
|
|
Special order item, limited supply on hand, 7-10 day delay if you want more.
|
Click to view or buy this item
|
|
This tool removes 1.88mm of paper between the blades to allow for the lead came. Used by studios since early times, they are almost indispensable for any intricate pattern work. 8" long. Imported.
|
|
|
Imported Lead Nippers
|
Item no:
6856
|
Diamond Tech
item:
603
|
Retail price:
$9.96
/each
|
3 or more $8.96 (10% discount) 6 or more $7.97 (20% discount)
|
In stock:
15
(units: each)
|
|
|
Click to view or buy this item
|
|
6-1/2" long. Great for cutting, trimming and mitering corners on small sizes of lead came. Also used for cutting hanging wire, lamp cord, brass wire and nasal hair. Imported.
|
|
|
Easy Cutter
|
Item no:
7244
|
|
Retail price:
$52.34
|
3 or more $47.11 (10% discount) 6 or more $41.87 (20% discount)
|
In stock:
6
|
|
|
Click to view or buy this item
|
|
Easy Cutter A precision cutting tool for lead came. All metal with a high carbon steel blade. Double ground and heat treated to stay sharp. Angle plate is calibrated with easy to read standard and metric markings.
|
|
|
Lead Straightener
|
Item no:
7345
|
Diamond Tech
item:
606
|
Retail price:
$12.88
/each
|
3 or more $11.59 (10% discount) 6 or more $10.30 (20% discount)
|
In stock:
2
(units: each)
|
|
Expected soon:12(units: each)
|
|
Click to view or buy this item
|
|
If your lead came has become disheveled or unruly, or if someone has stood upon it during some unguarded moment of high excitement, you will find a Lead Straightener highly serviceable for the purpose for which it is offered. After attaching the tool to your bench with a screw or bolt, you merely insert one end of your unfortunate lead between the jaws of the Lead Straightener and pull gently until the desired results are had. 1-7/8" high.
|
|
|
Tampico Bristle Glazing Brush - Small
|
Item no:
6930S
|
item:
2458
|
Retail price:
$6.46
|
|
In stock:
15
|
|
|
Click to view or buy this item
|
|
A natural bristle brush for use in cementing leaded glass panels. This is a small brush, 1-1/2" x 4-3/4" (38 x 121mm). Four rows with 12 tufts 5/8" (16mm) long. White tampico bristles with hardwood handle.
|
|
|
Tampico Bristle Glazing Brush - Large
|
Item no:
6930L
|
item:
2459
|
Retail price:
$11.47
|
|
In stock:
0
|
|
|
Click to view or buy this item
|
|
A natural bristle brush for use in cementing leaded glass panels. This is a larger brush 2-1/4 x 7-1/2" (63 x 190mm). Four rows with 12 tufts 1" (25mm) long. White tampico bristles with hardwood handle.
|
|
|
Wire Brush
|
Item no:
0938
|
|
Retail price:
$0.67
|
12 or more $0.57 (15% discount)
|
In stock:
570
|
|
|
Click to view or buy this item
|
|
This wooden handled brush has stainless steel bristles and is a handy size for you to use for burnishing lead joints before soldering them, or for cleaning old lead joints or solder preparatory to resoldering. This tool is also useful for cleaning electrical contacts, auto battery terminals, rusty things, and the like.
Mrs. Eberhard Faber of Los Alamos, R.I. writes to say: "Your #0938 brush is just super as a complexion brush for my daughter Millicent. Her face is a mess!"
|
|
|
Horseshoe Nails (Mustad)
|
Item no:
6851M
|
Mustad
item:
E-8
|
Retail price:
$0.41
/each
|
10 or more $0.373 (10% discount) 50 or more $0.331 (20% discount)
|
In stock:
164
(units: each)
|
|
|
Click to view or buy this item
|
|
We recognize that some of our customers may not have access to a supply of farrier's material, or may not care to have dealings with persons engaged in horse-type functions.
We have therefore made available our very own brand horseshoe nails, made to our specifications. (A point at one end, and a head at the other.) Every really swift leaded glass person is well aware of the requirement for a nail which will hold glass in place (on the work board) without chipping it, be easily removable, attractive, modest, and have just enough charisma to prevent the Cleaning Lady from throwing it out. Horseshoe nails have been used in leaded glass work for centuries. Our Horseshoe Nails are functional and recyclable to boot. (One can double as a cribbage peg, a hors d'oeuvre pick, or can be made into a finger ring for your high school sweetheart.) 2-3/16" long.
|
|
|
Horseshoe Nails (Liberty)
|
Item no:
6851L
|
Retail price:
$0.41
/each
|
10 or more $0.367 (10% discount) 50 or more $0.326 (20% discount)
|
In stock:
970
(units: each)
|
|
|
Click to view or buy this item
|
|
We recognize that some of our customers may not have access to a supply of farrier's material, or may not care to have dealings with persons engaged in horse-type functions.
We have therefore made available our very own brand horseshoe nails, made to our specifications. (A point at one end, and a head at the other.) Every really swift leaded glass person is well aware of the requirement for a nail which will hold glass in place (on the work board) without chipping it, be easily removable, attractive, modest, and have just enough charisma to prevent the Cleaning Lady from throwing it out. Horseshoe nails have been used in leaded glass work for centuries. Our Horseshoe Nails are functional and recyclable to boot. (One can double as a cribbage peg, a hors d'oeuvre pick, or can be made into a finger ring for your high school sweetheart.) 2-3/16" long.
|
|
|
Lead & Glass Stop Blocks
|
Item no:
6833
|
Aanraku Glass Studios
item:
LSB
|
Retail price:
$5.46
|
|
In stock:
16
|
|
|
Click to view or buy this item
|
|
Aanraku® Lead & Glass Stop Blocks for lead came stained glass work (25 pieces per bag).For use with horseshoe nails or round retaining nails.
|
|
|
Ecumenical Sawdust 1/2 lb bag
|
Item no:
8141
|
Whittemore-Durgin
item:
8141
|
Retail price:
$3.00
|
|
|
Click to view or buy this item
|
|
Use when cementing a leaded glass window or panel. Some people use whiting, but we like the traditional sawdust.
|
|
|
EZ-Cut Lead Came Cutter
|
Item no:
7248
|
Diamond Tech
item:
503
|
Retail price:
$60.75
|
3 or more $54.68 (10% discount) 6 or more $48.60 (20% discount)
|
In stock:
0
|
|
No longer available.
|
Click to view or buy this item
|
|
|
|
Plastic Burnisher/Lead Opener/Fid
|
Item no:
6822
|
Retail price:
$3.70
|
|
In stock:
3
|
|
Expected soon:15
|
|
Click to view or buy this item
|
|
A multi-talented tool which combines the function of a fid, for opening lead, but also can be used for smoothing down copper foil, running putty, removing excess putty, lifting lead came for repair work, and removing orange pips.
|
|
|
|